Description
Strong connection points on solar film
Each clip cap consists of two parts that grip the material from both sides. This creates a stable point to which a strap, rope or rubber band from the winding reel can be attached.
The two halves join with a simple press – the mechanism clicks into place, and no hammer or other tool is needed.
What you get
- Film protection: the load is spread around the fixing point, which reduces the risk of tearing when rolling up.
- Quick fitting: closing is done by hand.
- Different connections: strap, rope or rubber band.
Parameters
| Parameter | Value |
|---|---|
| Brand | Poolsana |
| Type | clip caps for a solar cover |
| Quantity | 10 |
| Material and colour | plastic, blue |
| Diameters | inner 11 mm, outer 28 mm |
| Closing | snap mechanism, no tools |
How to fit them
- Choose a spot near the edge of the cover.
- Place the upper and lower parts opposite each other on both sides of the film.
- Press evenly until the mechanism clicks and the cap locks in place.
- Attach the chosen strap, rope or rubber band.
Attention: the caps are for solar covers only. Do not use them with winter, safety or heavy covers.
Which winding reels they work with
Together with suitable straps they can be used with:
- the PROFI Deluxe model for above-ground pools (range 1.60–6.00 m)
- the stationary PROFI Deluxe, range 1.30–4.50 m
- the mobile PROFI Deluxe in both sizes: 1.20–4.20 m and 1.40–5.20 m
In the box
Ten blue plastic Hufer clip caps. The straps, ropes, rubber bands and the winding reel are not included.
See also: Wellness, Pools and Equipment, Saunas, Hot Tubs & Spas, Inflatable Products.
