Description
The PROFI II from Poolsana (item 280354) is the complete set for a pool with two return inlets. The tee splits the line to the two inlets, and all parts are Ø50 mm, so they combine without adapters.
Contents
- PVC cement and cleaner – one of each
- Adhesive tape – one roll
- SpaFlex hose Ø50 mm – 25 m roll
- Clips: five for pipe and one for hose
- Transition nipples with socket – two pieces; 1 1/2″ male thread to 50 mm
- Two-way ball valves 50 mm – two pieces
- Tee 50 mm – one piece
- 90° elbows 50 mm – four pieces
- 90° elbow with 1 1/2″ male thread to 50 mm – one piece
- Reducing 90° elbows with a socket on one side and a solvent-weld spigot on the other – three pieces
Technical specifications
| Feature | Details |
|---|---|
| Intended use | in-ground pools with a steel wall |
| Distance to the filter | 3–5 m, counting one line only |
| Branch fitting | 1 × 50 mm |
| Number and type of elbows | four at 90° (one threaded and three reducing) |
| Shut-off valves | 2 × 50 mm |
| Number of return inlets | 2 |
| SpaFlex hose | 1 roll, 25 m |
| Connection size | 50 mm |
| Item number | 280354 |
| Brand | Poolsana |
Application
The kit serves in-ground steel pools whose pipes are buried in the soil. The flexible SpaFlex is suited to such a connection. Twenty-five metres of hose is enough if there are 3–5 m between the pool and the filtration unit; for a greater distance, add more.
What sets it apart
- Ready for two inlets – the branch fitting and the additional fittings are included.
- More hose – 25 m is enough for both lines.
- One diameter – 50 mm throughout.
- Two valves – you can shut off the water to the filter during maintenance.
Installation steps
- Choose the location for the filtration system.
- Unroll the hose and cut it to the required lengths.
- Connect the threaded nipples to the pool outlets and to the filter inlet and outlet.
- After degreasing with the cleaner, bond the joints with the PVC cement.
- Secure the pipes with the clips, and let the cement cure before filling with water.
Winter add-on
The Poolsana drain set for PROFI is a perfect match for this kit. It is fitted at the lowest point of the pipework and lets the pipes empty completely in autumn, once the water level has been lowered.
