Description
A 45° branch for a smoother flow
The Atlas Pool Y-tee directs the side branch at an angle of 45° rather than 90°, so the water enters the branch more calmly. The fitting is made of heavy-wall UH-PVC, connects with solvent-weld sockets, is rated PN16 and is available in diameters of 50 and 63 mm.
Specification
| Manufacturer | Atlas Pool |
|---|---|
| Type | Y-tee with a 45° angle |
| Construction | heavy-wall UH-PVC |
| Pressure class | PN16 |
| Connection | solvent-weld socket |
| Code for ø 50 | 507 00 050 4 |
| Code for ø 63 | 507 00 063 4 |
| Where it is used | angled branch in pool piping systems |
When to choose it
The tee splits the flow in two directions, with the side outlet set at an angle. This way an additional line can be joined to the main one without a sharp bend. It is suitable for pool installations and for other solvent-welded PVC piping systems.
Connection
All three ends have sockets – the pipe is inserted and bonded with PVC cement. The surfaces are cleaned and degreased beforehand, and the open time and the method of applying the cement follow the instructions of its manufacturer.
Installation sequence
- Cut the pipe square and remove the burrs.
- Dry-fit the fitting.
- Apply cement and join the connections one after another, holding each for a few seconds.
- Wait until the cement has dried completely, and only then let water in.
Diameters
- Ø 50 mm, code 507 00 050 4.
- Ø 63 mm, code 507 00 063 4.
Both versions are PN16; choose the one that matches the outside diameter of your pipe.
Recommendations
- Check the pipe diameter before ordering.
- Buy PVC cement and PVC cleaner together with it.
- To change the direction of the line, see the 45° and 90° elbows from the same series.
The Atlas Pool series also includes fittings in other sizes and shapes, so the entire pipeline can come from a single brand. Each code in the catalogue corresponds to one size, which makes ordering easier.
See also: Wellness, Pools and Equipment, Plumbing Materials, Pools, Pool Chemicals, Pool Accessories.
