InverPOWER ULTRA 21 kW – Inverter Heat Pump for Pools up to 80 m³

€2,300.00

Full-inverter heat pump Poolsana InverPOWER ULTRA 21 kW for pools up to approx. 80 m³: heating output up to 21.06 kW and COP up to 18.03.

  • Mitsubishi rotary compressor, titanium heat exchanger
  • Touch-button display and WiFi app
  • BOOST, SILENCE and SMART modes
  • Winter cover, feet and condensate hose included

Frequently bought together

Total for selected:

Description

Poolsana InverPOWER ULTRA 21 kW is a full-inverter heat pump for heating pool water. It is recommended for pools with a volume of up to about 80 m³. Its maximum heating output is 21.06 kW, while it draws 0.33–3.40 kW from the mains. This brings the coefficient of performance (COP) up to 18.03.

How it achieves such high efficiency

Both the compressor and the fan change their speed smoothly instead of running at full power or switching off. As a result, the unit delivers several times more heat to the water than the electrical energy it consumes. The compressor is a rotary one made by Mitsubishi, and the heat exchanger is made of titanium and withstands both chlorinated and salt water.

Modes and control

  • Operation in heating mode, cooling mode or automatic mode.
  • BOOST – fastest heating; SILENCE – quietest operation; SMART – automatic power adjustment.
  • Control from the LCD display with touch buttons or from the free iOS and Android app via WiFi.
  • Real-time clock, timer, display of the set and the actual temperature.

Safety and appearance

The black metal housing has a protective coating, and the air outlet grille is moulded directly into it, which gives the unit a clean look. A pressure gauge monitors the pressure of the R32 refrigerant. High-pressure and low-pressure switches, as well as a water flow sensor, protect the unit: as soon as the water stops circulating, the heat pump switches itself off.

Technical specifications

ModelInverPOWER ULTRA 21 kW
BrandPoolsana
Pool volumeup to 80 m³ (recommendation)
Heating outputup to 21.06 kW at air 27 °C; up to 14.23 kW at 15 °C
COPup to 18.03
Electrical power0.33–3.40 kW
RefrigerantR32
Pipe connection∅ 50 mm
Voltage1 N / 230 V
Current and protectionup to 18.8 A; fuse 20 A
Noise level44–54 dB(A) at 1 m; 24–34 dB(A) at 10 m
Operating air temperaturefrom −10 to +43 °C
Dimensions1100 × 455 × 765 mm
ControlLCD display and app (WiFi)

Connection and installation

The heat pump is connected to the pressure pipe of the filter circuit via a bypass. The unit's connections have a 1 1/2″ female thread, and for the ∅ 50 mm pipe you use the fittings supplied (1 1/2″ male thread, 2 pieces). The pool's circulation pump must deliver at least 9.1 m³/h – preferably 1–2 m³/h more.

The power cable has 3 conductors and can be extended on site, and the unit can be connected directly to the electrical panel. This, like any other electrical work, is a job for a qualified electrician.

The unit belongs after the filter and before any water treatment device. With salt electrolysis, the salt content of the water must not exceed 0.5 % (5 g/l).

How large a pool it can heat

The stated volume of up to 80 m³ is a conservative figure. If your pool is at its limit, it is better to choose the next more powerful model – that way you will have a reserve even when the air is cooler.

Package contents

  • winter cover for the unit;
  • vibration-absorbing feet;
  • condensate drain hose;
  • two threaded couplings 1 1/2″ for connecting to a ∅ 50 mm pipe.

See also: Wellness, Pools and Equipment, Saunas, Hot Tubs & Spas, Inflatable Products.

You may also like

More from Poolsana

Newsletter

News, promotions and ideas for home and garden

Subscribe to our newsletter to receive news about promotions, new products and other useful information.