O-Ring Seal 50×3 for the Hose Connector of a Filter Pump

4,09 €

+40 points in “Joy Club” +1 000 bonus points on the second online purchase · terms

Original 50×3 O-ring for the hose connector on Azuro and PRO sand filter pumps. Protects the connection from leaks. Dark round seal.

Frequently bought together

Total for selected:

Description

The 50×3 O-ring seals the inlet through which the hose connector (the nozzle) enters the pump housing. The original Mountfield part is for Azuro and PRO.

Product Data

BrandMountfield
Item numberDS2920141252
Product typeO-ring seal
Size50×3
Installed inpumps of Azuro and PRO type filters

Suitable Filters

  • code 3BTE0244 → Azuro 9 m³/h
  • code 3BTE0060 → Azuro 6 and 7 m³/h
  • code 3BTE0058 → Azuro 4 and 5 m³/h
  • code 3BTE0551 and 3BTE0588 → Azuro 7
  • code 3BTE0550 → Azuro 5 Profi
  • code 3BTE0547 → Azuro 5
  • code 3BTE0544 → Azuro 11
  • code 3BTE0543 → Azuro 9
  • code 3BTE0362 → PRO S210T
  • code 3BTE0356 → PRO S166T
  • code 3BTE0355 → PRO S144T

What the Ring Does

The connector joins the hose to the pump, and the ring around it keeps the connection watertight. Over time the rubber flattens, loses its elasticity and tears easily when taken apart. The connection then leaks or the pump draws in air.

Signs It Needs Replacing

  • a puddle forms next to the connector
  • the pump sucks in air and runs noisily
  • the rubber is crushed, chipped or broken

Replacement in Five Steps

  1. Disconnect the pump from the power and shut off the water.
  2. Remove the hose and take off the connector.
  3. Remove the old ring and clean the seat.
  4. Fit the new ring evenly into the groove.
  5. Reassemble the connector, attach the hose and check for leaks.

The Advantage of the Original Size

The part is made for the specific model, so it needs no modification. Substitutes often differ by a millimetre or so, and the problem comes back.

Maintenance

Before putting the pool away for winter, inspect the connections. Store removed parts in a dark, dry place, and tighten plastic threads by hand only – without a power tool. Do not combine the new ring with neighbouring parts that are already distorted.

In the Package

You receive an original Mountfield part with the number DS2920141252. Check the number and the model of your equipment before ordering. When replacing the ring, also inspect the 6×2 O-ring and the 14 mm mechanical seal; the pre-filter basket is also worth a look.

See also: Wellness, Pools and Equipment, Spare and Other Parts, Pool Spare Parts, For Filters and Other Equipment, For Prefabricated Pools, Pool Liners, Pool Underlays.

You may also like

More from Mountfield

Newsletter

News, promotions and ideas for home and garden

Subscribe to our newsletter to receive news about promotions, new products and other useful information.