Description
MINI is a series of Atlas Pool ozone kits for private pools that are not heavily loaded – whether outdoors or indoors. The generator is supplied together with the installation set, so you do not have to assemble parts separately.
How to get clean water without bubbles
The set is connected to the line to the jets. In a venturi the ozone is mixed with the water, and immediately after it the degasser separates the gas that has not dissolved. This excess exits through a valve and reaches a neutralising module, so no ozone bubbles appear in the pool.
Choosing a model
| Model | Ozone | Pool volume | Catalogue no. |
|---|---|---|---|
| MINI-1 | 1 g/h | 1–10 m³ | OZMINI001 |
| MINI-5 | 5 g/h | 10–50 m³ | OZMINI003 |
| MINI-10 | 10 g/h | 50–100 m³ | OZMINI005 |
| MINI-15 | 15 g/h | 100–150 m³ | OZMINI006 |
Ozone does not replace the main disinfectant – it remains necessary.
Technical data
| Parameter | Value |
|---|---|
| Manufacturer | Atlas Pool |
| Item | OZ003 |
| Series | MINI |
| Purpose | ozone disinfection of the water |
| Efficiency | 45 % |
| Generator output | 1, 5, 10 or 15 g of ozone per hour |
| Range (pool volume) | from 1 to 150 m³ |
| Intended for | private pools with a light load – outdoor and indoor |
The kit includes
- ozone generator;
- MINI installation set for the line.
Advantages
- ozone is a strong oxidiser and works alongside the chlorine;
- generator and set in one kit;
- the excess ozone is neutralised, with no bubbles in the pool;
- for private pools, outdoor or indoor.
How it differs from the other series
If you are comparing the series: SuperEco serves only up to 10 m³ and has no degasser; ECO is the budget option with 20 % efficiency; MINI adds a degasser plus a neutralising module and reaches 150 m³. Further up are MIDI (65 %, villas up to 300 m³) and MAXI (80 %), created for pools in public facilities.
Water composition
Keep free chlorine at 0.3–0.6 ppm and the pH between 7.2 and 7.4. Ozone alone does not disinfect the water sufficiently. The manufacturer therefore advises adding automatic dosing or a salt chlorinator.
Safety and installation requirements
Ozone is a strong oxidiser, so the MINI ozone generator must be connected only by a qualified technician and strictly according to the manufacturer's instructions. The following conditions apply to the installation:
- power supply 220 V / 50 Hz (180–240 V permitted);
- a vacuum breaker and a non-return valve must be fitted;
- do not block the ventilation openings of the unit;
- protect the unit from splashes and from drips from the pipes;
- the room must be ventilated and dust-free, with humidity of no more than 50 % and a temperature of up to 25 °C;
- wipe the outer casing with a slightly damp cloth, but only after disconnecting it from the power;
- never push objects into the fan grille, and make sure none fall into it;
- do not install the unit in bathrooms, kitchens or similar rooms;
- do not inhale concentrated ozone – if there is a leak, switch the unit off and ventilate immediately.
See also: Wellness, Pools and Equipment, Filters and Treatment, Pools, Pool Chemicals, Pool Accessories.
