Description
In an overflow pool the water collects in a balance tank, and it is there that it is decided whether the surface will be level and beautiful. REGUL Bulleur manages the level in this tank and tops up the water when needed. Measurement is accurate to the centimetre and works with tanks of different shapes and sizes.
- Reads the water height in the tank
- Decides when to top up
- Helps the overflow system work evenly
Measurement through an air tube
The manufacturer has chosen a solution in which there is no submerged probe, metal rod or float in the tank. The device itself sits in the technical room, and a simple air tube leads to the tank. The measuring part is not permanently in the water, corrosion does not affect it, and maintenance is easier. All settings are made from the control panel.
Consumption control
In the event of unusually long or incorrect filling, the system limits the supply to avoid excessive consumption. It also calculates and displays the approximate water consumption, so deviations can be noticed earlier.
What the LCD screen shows
- the current water height in the tank;
- the actions the system is performing at the moment;
- the estimated water consumption.
The data can be read from the technical room without opening the tank.
Technical data
| Brand | REGUL’Électronique |
|---|---|
| Model name | Bulleur |
| Item number | REG-BULLEUR |
| Manufacturer number | BUL003 |
| Type | Level regulator |
| For | Overflow pool |
| Controls | Balance tank |
| Topping up | Automatic |
| Measurement | Via air tube, no submerged probe |
| Accuracy | To the centimetre |
| Overfill protection | Yes |
| Water consumption calculation | Yes |
| Display | LCD |
| Protection rating | IP65 |
| Origin | France |
French development
The French company REGUL’ELECTRONIQUE creates and assembles Bulleur in its own production facility. Before leaving the factory, the unit is tested and assigned a personal traceability number.
Frequently asked questions
Where is it used?
For overflow pools with a balance tank; the system manages the level and its topping up.
How is the level measured?
Through an air tube between the tank and the controller, accurate to the centimetre.
Is anything submerged in the water?
No – there is no electrical probe, mechanical float or metal rod.
How does it protect against excess consumption?
Excessive or incorrect filling is limited, and consumption is shown on the screen.
Is it suitable for a skimmer pool?
That is not its main purpose – the REGUL Niveau model is designed for skimmer pools and spas.
