Lux Waterfall Arch for the Pool Edge, Stainless Steel, 3 Sizes

Description

The Lux arch is the most impressive waterfall in the Atlas Pool range. It is made of high-quality stainless steel and falls as a wide curtain of water from the edge of the pool. Besides decorating, the flow massages the back and shoulders. Three models are available according to the width of the curtain – 400, 500 and 600 mm.

What you get

• three models – Lux 1, Lux 2 and Lux 3;
• curtain width 400 – 600 mm;
• 2″ connection for all models;
• weight from 29 to 40 kg depending on size;
• anchors for fixing included (the circulation pump is not included).

Decor and hydromassage

Waterfall arches (also called water curtains) suit any pool – public or private. The strength of the jet and the width of the opening determine the feeling: from a light, refreshing shower to a strongly invigorating massage that relaxes tense neck and back muscles. The wide curtain of the Lux gives the pool the look of a luxury spa complex.

Dimensions and parameters

Lux 1 (400 mm curtain, no. HDU067)

• dimensions: A 755, B 400, C 620, D 155, E 8, F 1000 mm
• 2″ connection, pump up to 1.1 kW
• weight 29.00 kg

Lux 2 (500 mm curtain, no. HDU068)

• dimensions: A 755, B 500, C 680, D 170, E 8, F 1000 mm
• 2″ connection, pump up to 1.5 kW
• weight 34.00 kg

Lux 3 (600 mm curtain, no. HDU069)

• dimensions: A 755, B 600, C 760, D 190, E 8, F 1000 mm
• 2″ connection, pump up to 2.2 kW
• weight 40.00 kg

Installation steps

1. Choose a pump according to the model – from 1.1 to 2.2 kW (see the data above).
2. Fix the arch. It is placed on the pool edge by the rim and secured with the supplied anchors.
3. Connect the water. The connection to the pump is 2″.
4. Provide protection. An RCD matched to the pump data is required.

Important: the equipment must be installed only by a qualified specialist in accordance with a valid construction, technological, water-supply and electrical design prepared by a licensed designer. When connected to a circulation pump, a residual-current device (RCD) with parameters matched to the pump data is required. The buyer is responsible for correct installation and use.

Frequently asked questions