Description
Warm, light decking with classic grooves
DECKER D100 in the Wheat shade is a composite board with longitudinal channels on the face. The soft, sunny colour brightens the outdoor space and pairs easily with greenery, stone and light façades. The profile is part of the DECKER WPC Decking system and is designed for open-air areas – from the poolside to the garden veranda.
The profile at a glance
| Application | Outdoor decking: around pools, terraces, verandas, yards |
|---|---|
| Manufacturer code | D100 |
| System | DECKER WPC Decking |
| Sales unit | 1 whole profile = 3 linear metres |
| Material | WPC – wood-polymer composite |
| Cross-section and length | 140 × 26 × 3000 mm |
| Surface | Grooved, with longitudinal lines |
| Colour | Wheat |
| Model | DECKER D100 (WPC Deck) |
What this choice gives you
- Calm aesthetics: the light shade creates a sense of space and cleanliness and is softer than dark decking colours.
- Practical cross-section: a width of 140 mm and a thickness of 26 mm make it easier to plan and lay out the area.
- Modular system: the profile combines with the substructure, clips and finishing elements from the same series.
- Flexible use: suitable for private yards as well as for hotels, restaurants and other venues.
Where it is used
- relaxation areas around a pool
- terraces and verandas
- gardens and yard areas combined with greenery and stone
- hotel and commercial outdoor spaces
What else you need for a finished deck
The board itself is the visible part. For a complete structure, separate items from the DECKER system are added to it:
- DP110 support profile – the substructure on which the boards are laid;
- DK210 mounting clip – holds the boards to the base and forms an even joint;
- start and end clip – for a clean start and finish along the perimeter;
- D400 L Deck finishing profile – closes exposed edges and end faces.
Consumption and quantity
With one item you get one whole board 3 m long. For 1 m² of decking it is advisable to allow about 7 linear metres of decking; the exact number of boards and accessories depends on the outline of the area, the laying direction and the cutting plan. The safest approach is to consider the system as a whole – boards, support profiles, clips and end pieces.
Questions and answers
Is a single profile enough for installation?
No. A finished deck usually also needs a support profile, clips, start and end clips and, where necessary, finishing profiles.
Is it suitable for a pool surround?
Yes, this is one of its main uses – Wheat blends lightly into the area around the water.
What is the difference between Deck and Emboss?
Deck (series D100) has a grooved surface with straight lines, while Emboss (series D201) imitates a relief wood grain. This product belongs to the Deck series.
Can it be combined with other elements of the series?
Yes – by choosing compatible items, the system is completed with a support profile, clips and DECKER finishing profiles.
See also: Wellness, Pools and Equipment, Saunas, Hot Tubs & Spas, Inflatable Products.
