DECKER L Deck D400 L-Profile 140×60×3000 mm, Grooved, for WPC Decking

39,00 € – 43,90 €

up to +439 points in “Joy Club” +1 000 bonus points on the second online purchase · terms

DECKER L Deck D400 L-shaped profile with a grooved surface that closes the visible edges of a WPC deck. Size 140×60×3000 mm, available in Anthracite, Nut Coffee and Wheat.

  • Material: WPC
  • Sold as a whole 3 m profile
  • Suits D100 boards

Frequently bought together

Total for selected:

Description

What the D400 profile does

When a deck has an open side or front edge, the cross-section of the boards and the substructure is visible. L Deck D400 is an L-shaped WPC profile that covers both the top edge and the vertical side of such an edge detail. Its grooved surface repeats the lines of the D100 boards, so the finish looks like part of the same deck.

What the dimensions 140×60×3000 mm mean

  • 140 mm – width of the horizontal part;
  • 60 mm – height of the vertical part;
  • 3000 mm – length of one profile (3 metres).

Three colours

  • Anthracite – a dark graphite tone;
  • Nut Coffee – a warm brown tone;
  • Wheat – a light, natural tone.

Choose the colour according to the boards you will use for the deck.

Its place in the DECKER Deck system

L Deck is only a finishing element and replaces neither the supporting structure nor the clips. It is added only where the project has a visible edge. It is usually combined with:

  • D100 board with a grooved surface;
  • DP110 support profile;
  • Deck Clip mounting clips;
  • Start / Finish clips.

How to order

One unit is one whole 3 m profile, not a linear metre. The quantity is calculated from the total length of the edges to be closed.

Technical specifications

BrandDECKER
ModelL Deck D400
Nominal size140 × 60 × 3000 mm
ProfileL-shaped trim for WPC decking
Made ofwood-polymer composite
SeriesDECKER Deck
Top surfacegrooved
Width of the horizontal side140 mm
Height of the vertical side60 mm
Profile length3 m
Available shadesWheat, Nut Coffee and Anthracite
Quantity per packone whole profile

Frequently asked questions

What do I get with 1 piece?

One whole L Deck D400 profile, 140×60×3000 mm, in the selected colour.

Is it needed on every deck?

No, only when exposed edges remain that need to be finished.

What is the difference from D401?

D400 has a grooved surface, while D401 has a 3D wood-grain relief.

Are clips and a support profile included?

No, only the finishing profile is sold; DP110, the clips and the boards are separate.

See also: Wellness, Pools and Equipment, Saunas, Hot Tubs & Spas, Inflatable Products.

You may also like

More from DECKER

Newsletter

News, promotions and ideas for home and garden

Subscribe to our newsletter to receive news about promotions, new products and other useful information.