Description
Cipollino is a white glass-ceramic mosaic with hexagonal chips and a white marble pattern with thin green veins. It looks like a light, fresh stone with a delicate botanical motif, and water and light add depth. The hexagons differ slightly in shade and give a clean, calm surface.
What makes Cipollino different
- Non-porous glass: water absorption is up to 0.04%, so the surface does not grow mould and does not hold stains or odours.
- Lasting colour: it fades neither in the sun (ISO 4892) nor from cleaning products (class A per ASTM C650).
- Frost-resistant: it withstands freeze-thaw cycles (ASTM C1026), so it is also suitable for outdoor areas.
- Strength: flexural strength of 55 N/mm² (EN ISO 10545-4) and a smooth, defect-free surface.
- Eco-friendly composition: made entirely of recycled glass (100%), coloured without lead, cadmium or other heavy-metal pigments.
Silicone dot backing
Each sheet is mounted on a flexible backing of small silicone (polyurethane) dots that hold the chips together but do not cover their backs. As a result, the adhesive reaches more than 95% of the back surface of the chip and the bond is very secure. The thickness of the mosaic stays unchanged, and the backing itself does not break down from adhesive and grout and does not warp in storage. The sheet is flexible, so it follows rounded walls, steps and corners with ease.
| Backing | Free back surface for the adhesive | Visibility when laying | Curves and corners | After laying |
|---|---|---|---|---|
| Silicone dots | over 95% of the back | chips and grout lines are visible | very easy, the sheet is flexible | nothing to remove |
| Mesh | less, because the mesh covers part of the back | chips are visible | easy | nothing to remove |
| Paper | the whole back surface, but the paper is on the face | chips are under the paper | difficult, the paper tears | the paper is soaked and removed |
Appearance and use
It is suitable for a light bathroom, a kitchen worktop and any place where a clear but not cold feel is wanted.
- decorative bathroom wall
- cladding above the kitchen worktop
- panels for spa centres, hotels and restaurants
Technical specifications
| Parameter | Value |
|---|---|
| Code | MOSFBDJ033 |
| Chip shape | hexagon with a printed pattern |
| Type | hexagonal patterned mosaic, decorative effect |
| Pattern and colour | white marble with green veins |
| Material | glass ceramic (100% recycled glass) |
| Backing | silicone (polyurethane) dots |
| Sheet (length × width) | 300 × 290 mm |
| Number of sheets per square metre | 13 |
| Grout joint width | 2 mm |
| Surface defects | none (100%), per EN ISO 10545-2 |
| Water absorption | maximum 0.04%, per EN ISO 10545-3 |
| Flexural strength | 55 N/mm², per EN ISO 10545-4 |
| Frost and thaw | resistant, tested to ASTM C1026 |
| Chemical resistance | class A, no change, tested to ASTM C650 |
| Sunlight | colour remains unchanged, tested to ISO 4892 |
| Thermal expansion | passed in accordance with EN ISO 10545 |
| Where to install | in bathrooms and showers, kitchens, spa and hammam rooms, on decorative walls |
| Packaging | carton with 1 m² (13 sheets) |
Step-by-step installation
- Substrate: smooth (up to 2 mm unevenness over 2 metres), dry, stable and clean. In the shower area, waterproofing is applied first.
- Adhesive: white flexible cement-based adhesive of class C2TE S1. The glass chips let a little light through, and a dark adhesive would cloud their colour.
- Adhesive layer: using a notched trowel (3–4 mm teeth), apply the adhesive over an area of 2–3 sheets.
- Laying: the sheet is placed and pressed evenly with a rubber float; the gap between the sheets must equal the grout joint – 2 mm.
- Cutting: in corners and around outlets, the silicone links are cut with a utility knife, and single chips are shortened with special glass pliers.
- Grouting: only the next day (after 24 hours). In showers and other wet areas, use an epoxy or waterproof C2 grout – it does not let water through and does not change its colour. A white grout gives a continuous light effect, while a light green one accentuates the veins.
- Cleaning: excess grout is wiped off with a damp sponge before it dries; epoxy grout – immediately with a special cleaner.
- Putting into use: water is let in only after the grout has fully hardened.
Required materials and tools
- adhesive: white, C2TE S1
- grout: epoxy or waterproof
- a notched trowel (3–4 mm) and a rubber float
- for cutting: snap-off blade knife and special pliers
- cleaning: sponge, container of clean water
The adhesive quantities are approximate: for chips up to 25 mm – about 2 kg per square metre, for 40 mm – 2.5 kg, and for even larger ones – 3 kg. The final consumption varies with how smooth and absorbent the substrate is, the materials, the trowel and the installer’s experience – check it against the technical data sheets and with your installer.
Caring for the mosaic
- Clean with a soft cloth or sponge and a mild, neutral cleaner.
- Do not use abrasive powders, wire brushes or acidic solutions on the grout.
- After showering, go over the glass with a squeegee – no water marks are left on the glass.
Frequently asked questions
What adhesive is suitable for Cipollino?
Flexible white cement-based adhesive of class C2TE S1 – it preserves the tone of the glass.
What grout should I choose?
In wet areas, epoxy or waterproof grout is preferred. A white grout gives a continuous light effect, while a light green one accentuates the veins.
Can I apply it over old tiles?
Yes – provided the old cladding is firmly attached, free of grease and treated with a suitable primer.
How much material should I order?
The mosaic is packed at 1 m² per carton. Buy everything at once and add 5–10% for cutting waste – that way the sheets will come from the same production batch with no difference in tone.
Colour in the photo and in real life
Glass changes its appearance depending on the lighting, so the finished wall may differ slightly from photographs and computer images. The influences include the device screen, natural or artificial light, the viewing angle, the colour of the grout and adhesive, surrounding colours, the production batch and, for mixes, the natural variation between individual chips. Visualisations are indicative and serve as a guide.
See also: Wellness, Pools and Equipment, Cladding and Paving, Pools, Pool Chemicals, Pool Accessories.






























