Description
If you clean the pool floor with a vacuum device, you need a place where the filtration system can draw in the water together with the dirt. The Atlas SS007 vacuum nozzle is exactly that inlet. It is mounted on the wall below the water surface, and the cleaner hose is attached to it. The pump and filter of the pool take in the dirt without you having to drain the water.
Available versions
- Ø63 for glass-ceramic – HKE104;
- Ø50 for glass-ceramic – HKE106;
- Ø63 for liner – HKE105;
- Ø63 threaded – HKE157.
Check the pipe diameter and the type of lining to choose the right version.
Technical specifications
| Brand | Atlas Pool |
|---|---|
| Shop code | SS007 |
| Manufacturer codes | HKE104 / HKE106 / HKE105 / HKE157 |
| Type | vacuum suction nozzle |
| Diameter | 99 mm |
| Connection size | Ø50 or Ø63 mm |
| Weight | 0.10–0.19 kg |
| Pool lining | glass-ceramic or liner |
| Body material | ABS |
How to use it
Run the cleaner only while filtration is on, and first make sure the nozzle cap is closed properly. When cleaning is finished, close the opening so that leaves and other debris cannot get in – this keeps the system from clogging and makes it last longer.
Material and durability
The ABS body is light, withstands water and chemicals, will not rust and does not warp in the sun.
When to replace it
Replace the nozzle if it cracks or if the cap no longer fits tightly. The new part restores full suction power, and the vacuum cleaner works as it should.
Installation warning
Important! This product must be installed by a qualified technician only. Incorrect installation or improper use carries a risk of serious consequences.
See also: Wellness, Pools and Equipment, Spare and Other Parts, Pools, Pool Chemicals, Pool Accessories.
