Description
What they are for
The adapters allow the Azuro heat pump to be connected to the pool hoses. The pack contains two parts – one for the water inlet, the other for the outlet. They fit hoses with a diameter of 32 and 38 mm, i.e. the most common pool hoses.
In brief
- two parts in the pack – inlet and outlet;
- 32 and 38 mm hoses;
- easy to remove when winterising the pool;
- designed for Azuro heat pumps.
Technical data
| Brand | Mountfield |
|---|---|
| Type | Hose adapter reducer |
| Item No. | 3BTZ0039 |
| Diameters | 38 and 32 mm |
| Contents | 2 pieces |
| Fits heat pumps | Azuro with numbers 3BTE0479, 3BTE0480 and 3BTE0481 |
Installation steps
- Remove the blue nut from both connectors of the heat pump through which the water enters and leaves.
- Fit the rubber seal (part of the coupling nut) onto the hose adapter.
- Insert the adapter into the inlet (or outlet) of the heat pump.
- Tighten the adapter with the coupling nut.
Removal is done in the same way in reverse order, which is useful when winterising.
Compatibility
The reducers are intended only for certain Azuro heat pumps – items 3BTE0479, 3BTE0480 and 3BTE0481, according to the manufacturer. Check the number of your heat pump before you order.
Useful recommendations
- Disconnect the heat pump from the power supply before you start.
- Make sure the rubber seal is in place.
- The nuts are tightened by hand; after turning the water on, check for leaks.
- In autumn, remove the adapters together with the hoses and store them in a dry place until the next season.
See also: Wellness, Pools and Equipment, Saunas, Hot Tubs & Spas, Inflatable Products.
