Description
The part in brief
The lid is designed for the pump basket of the Clear filtration. Because it is transparent, you can see at once when the basket needs emptying. A cracked lid, on the other hand, leads to air being drawn in.
Technical data
| Item | BWP6665 |
|---|---|
| Brand | Mountfield |
| Part type | pre-filter lid |
| Material | transparent plastic |
| Application | Clear 2 m³/h sand filtration |
Compatibility
- Clear 2 m³/h filtration with number 3BTE0398 – models from 2014 to 2021
The lid is used together with the pre-filter gasket and the O-ring of the filtration body.
When to replace it
- the lid is cracked or punctured
- the thread is worn and will not tighten
- the plastic is cloudy and you cannot see through it
- the pump draws in air along the edge
How to fit it
- Disconnect the pump from the power supply.
- Unscrew and remove the old lid.
- Inspect the gasket and the basket.
- Screw on the new lid by hand.
- Start the pump and check for bubbles and drips.
Advantages of the original
The lid is opened often and therefore cracks most easily. The factory lid has the exact thread for the pump, and the transparent body makes it easy to check for leaves and hair, so the pump does not get blocked.
Winterising
At the end of the season, wash the parts with cold water, dry them and store them in a dry place, away from chemicals.
Before ordering, compare the shape with the photos and the manufacturer's number. If you are unsure about the model, you can send us a photo of the pump.
See also: Wellness, Pools and Equipment, Spare and Other Parts, Pool Spare Parts, For Filters and Other Equipment, For Prefabricated Pools, Pool Liners, Pool Underlays.
