Description
The Comfort is a ladder with a slight slope, which makes climbing in and out easier than with straight models. This version has three steps and is for in-ground pools from 1.10 m deep. The sturdy Ø43 mm handrails provide a firm support.
Materials and construction
The entire construction is made of AISI 304 stainless steel (standard ČSN 17240). The steps have plastic anti-slip pads, and protective elements at the bottom protect the pool wall. It fits pools with a vertical wall and is a good choice for people who prefer a gentler access, including those with limited mobility.
Advantages
- Three wide steps with anti-slip plastic.
- Stainless steel designed for long-term use in a pool environment.
- Convenient slope.
Data
| Feature | Value |
|---|---|
| Brand | Mountfield |
| Origin | Czech Republic |
| Package | gross 18 kg, 10 × 210 × 129 cm |
| Net weight | 17 kg |
| Load capacity | 120 kg |
| Width | 500 mm |
| Handrails, diameter | 43 mm |
| Material | AISI 304 stainless steel |
| Intended for | in-ground pools |
| Minimum depth | 1.10 m |
| Number of steps | 3 |
| EAN / GTIN-13 | 8594168080704 |
| Previous code | 3EXX0086 |
| Catalogue number | 3BPZ0138 |
The set includes the ladder, mounting anchors and fixings for fastening in concrete or a paved surface.
Installation and care
The anchors are fixed firmly in the concrete slab, and the ladder is attached to them. Do not pour the anchors separately without the ladder in place – the distance between them may turn out wrong. Before use, check for missing parts and damage.
The water must have a pH between 7.0 and 7.4, and free chlorine of less than 1 mg/l. Concentrated chemicals or a floating chlorine dispenser must not touch the stainless steel. Deposits are cleaned off at least once every three months, after which a protective preservative is applied. At the end of the season, the ladder is cleaned and stored in a dry place, away from chlorine and iron.
Not suitable for water with salt electrolysis.
Questions and answers
What depth does it require?
The current Mountfield specification gives a minimum of 1.10 m. The old instructions for the three-step variant mention a guideline of about 1.20 m; the final decision depends on the geometry of the pool edge and the installation.
Can it be used in salt water?
No – the manufacturer expressly excludes it for salt electrolysis.
How do I maintain the steel?
Clean off organic and mineral deposits at least every three months and polish with a preservative. Avoid contact with concentrated chlorine and iron.
See also: Wellness, Pools and Equipment, Pool Accessories, Pools, Pool Chemicals, Filters and Treatment.























