Description
What the stabiliser is for
In hot weather and strong sunlight, the chlorine in the water breaks down very quickly – sometimes its level drops within hours. Azuro Chlor Stabil is a granular product that slows this process down. The chlorine stays active for longer, so you need fewer chlorinating products and notice a weaker chlorine smell.
What you get
- Protection of chlorine from high temperatures and solar radiation.
- Longer action of chlorine-based products, for example after shock chlorination.
- Reduced chlorine consumption and less unpleasant odour around the pool.
- A 1 kg pack, sufficient for 30 m³ of water.
How to use
- Fill the pool, adjust the pH and chlorinate the water, for example with Azuro Chlor Shock G.
- Measure out 350 g of stabiliser for every 10 m³ (10,000 l) of water.
- Dissolve the dose in a plastic container with warm water and pour the solution along the walls of the pool. If you have a skimmer and filtration, the product can be placed in the dosing unit.
- When topping up with fresh water, add 35 g for every 1000 l of water added.
How much product for which volume
| Water volume | Initial dose |
|---|---|
| 5 m³ | 175 g |
| 10 m³ | 350 g |
| 20 m³ | 700 g |
| 30 m³ | 1.05 kg |
| 40 m³ | 1.4 kg |
After topping up with fresh water, the dose is supplemented with 35 g for every 1000 l.
The values are calculated from the rate of 350 g per 10 m³. It is a good idea to check the chlorine and pH levels with a tester.
Product data
| Manufacturer | Mountfield (Azuro) |
|---|---|
| Code | 3BCH1001 |
| Type | Pool product, chlorine stabiliser |
| Form | Granules |
| Pack | 1 kg |
| Dose | 350 g per 10 m³ |
| Additional dose | 35 g per 1000 l of fresh water |
| Application | Outdoor and seasonal pools; dissolving in water or via a dosing unit |
Safety
Read the label before use. Wear protective clothing, gloves and eye and face protection, and do not eat, drink or smoke while working. Store the product locked away, out of reach of children and animals. Never mix different products, and always add the product to water, not the other way round. The text is for information only – follow the instructions on the packaging.
